Stores

Vendor productsProducts found: 329

Buy online IEEE 1394 9 pins to 4 Pins 800Mbps Fire Wire cable sizes: 3ft, 6ft, 10ft and 15ft from 1000ftcables store. 9 to 4 Pins Fire Wire used for connecting to a pc’s.

1000 item(s)

It is trouble-free and comfortable to utilize. It is suitable lengths.

47 item(s)
+

Minimum quantity for "Inspection Lamp" is 1.

$76.32 $68.69
Add to wish list

Installer Series Quad MM/SM Wave Testers are standards for cabling to specify the set of guidelines (such as fiber length), and this MM/SM Wave Testers best for cabling for networks.

12 item(s)
+

Minimum quantity for "Installer Series Quad MM/SM Wave Tester" is 1.

$1,640.00 $1,414.50
Add to wish list

wireless PCI adapter which provides a simple and easy way to add or upgrade wireless connectivity to your desktop or notebook computer. This high-gain PCI adapter supports higher data rates up to 300Mbps.

18 item(s)
+

Minimum quantity for "Internet Wireless PCI adapter" is 1.

$24.48 $20.48
Add to wish list

KU-Band Dual Single LNBF, I/P Frequency:  11.7 ~ 12.75 GHz,  O/P Frequency:  950 ~ 2000 MHz Noise Figure: 0.3 dB L.O. Frequency: 10.75 GHZ. Fetures : L.O. Phase Noise (TYP):  -70 dBc/Hz@1 KHz -90 dBc/Hz@10 KHz -105 dBc/Hz@100 KHz  Gain: 65dB(TYP)  Output VSWR  2.0:1  Image Rejection  45dB(min.)

496 item(s)
+

Minimum quantity for "KU-Band Dual Single LNBF" is 1.

$29.99
Add to wish list

Automatically switch between two LNBs allowing reception from multiple satellites with any 22KHz compatible receiver.22KHz tone switches are the most reliable switches on the market. We have load tested this switch with over 3 times the current draw rating and hot patched over 1000 cycles, which blew every other of the competition's switches leaving them dead. 22KHz switches kept reliably switching for thousands of cycles under this tremendous load! Example of a two room connection with a 22KHz switch. Features: 2x1 Multi Switch Frequency Range: 950-2150MHz Insertion Loss: 1.5dB Isolation: dB Power Supply: 12-20V / 25mA Passing Current: 300mA Max Control Signal: 0 / 22KHz / tone buse Diagram:

27 item(s)
+

Minimum quantity for "Lot 10 Satellite Switches 2x1 22KHz DirecTV Switch" is 1.

$24.99
Add to wish list

The DiSEqC switch will enable the user to select one LNB signal between 4 different LNBs of any type.The 4 input ports marked LNB A, B, C or D are connected to the 4 LNBs, which may be on 4 different dishes, and the output marked OUT is connected to the receiver.The selection of the LNBs is done by choosing the appropriate Tone Burst A, B, C, or D in the menu of the receiver. Compatible with all brands of receivers, including Coship, BEC, Satwork, Traxis, Prosat, Pansat, Fortec Star, Topfield, Twinhan, VisionPlus, Goldsat, and much more. Features: Frequency Range : 900-2400MHz Insertion Loss: 3dB Power Passing : 500mA Max IN/OUT :SatA, SatB, SatC, SatD, To Reciever  

70 item(s)
+

Minimum quantity for "Lot of 10 Satellite Switches 4x1 DiSEqC" is 1.

$49.99
Add to wish list

Low Voltage Pro Tester  with RJ45 Wall Jack ID APP , Identifier (ID) Kit , RJ45 Wall Jack .

200 item(s)
+

Minimum quantity for "Low voltage Cable ID KIT" is 1.

$34.95 $30.00
Add to wish list

High quality Low Voltage LVPRO-COAXID and maps mulitple wall jacks for Cat5/6 and Coax connections. It is easy to operate in industries offices and home.  Coax Wall Jack available at 1000ft store at good price.

200 item(s)
+
$39.95 $34.00
Add to wish list

Tester  is super accurate and meets all low voltage installation demands.Following test apps are included with the product . Speaker Popper, Cable Test Pack Wall Jack Mappers (RJ45/COAX), , Speaker 7.1 ID# Mapper, Detection, Length-RLQ Pack, Alert LEDs (Links, Volts), 10/100/1000 Detection/Display, PoE / Pairs, CCTV, Vpp(peak to peak voltage), Phone, Print up to 250 Reports Port Blink Cable Loaded Battery Test .

 
200 item(s)
+

Minimum quantity for "Low Voltage Pro Cable Tester Model 3" is 1.

$349.00
Add to wish list

·         cables and devices can be tested by  LVPRO1 , All low voltage installation demands are met by the device , It has LEDs alert, locator tone, blink port. speaker, cable test pack , It has upgradeable web , It will provide 6 apps with tester .

200 item(s)
+

Minimum quantity for "LOW VOLTAGE PRO MODEL 1" is 1.

$149.00 $128.00
Add to wish list

·          For accurate testing, LVPRO2 Low Voltage PRO Model 2 is a suitable device , It can be upgraded via the web or by the manufacturer to the Model 3 , Length-RLQ is available with it which adds length readout , 6 main applications are provided including, Toner Locator and Alert LEDs, Cable Test Pack functions, Speaker 7.1 ID for A/V speaker wire, Speaker Pop, Port Blink and Wall Jack ID ,  A remote unit, two RJ45/alligator clip adapters, cable, 9V battery, two Cat 6 patch cables;, Upgrade/Printer/PC USB and user's manual and a case included with the product.

200 item(s)
+

Minimum quantity for "Low Voltage PRO Model 2 Cable/Device Tester" is 1.

$249.00 $214.00
Add to wish list